Wireless Remote Control Switch 220V Receiver 2 Waterproof Transmitter

Suitable for security alarm, remote control electric doors and windows, signal control and etc. Easy to install and use. Save yourself time by using a wireless remote to switch on your load from a distance.

Learning Method

Hold the learning key until the indicator off. , then press any button of remote, indicator will flash 4 times, then will keep lighting,it means it learns successfully. The controller can learn fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, ) 20 different code.

Clearing Method

Continuously hold learning key about 8 seconds until the indicator put out, then keep lighting, it means it clears successfully.

Working Way Switching

Through the sub circuit board behind the pad 1, 2, 3 different local to switch working way.

1 jog1, 2, 3 pads non-occupation, not connect

2 self-lock, shorted 1, 2

3, inter-locking shorted 2, 3

Working Way

Jog—- press the button is ON . loosen your finger is OFF.

Self -lock—– press one button for one time is ON .press the same button again is OFF.

Inter-lock——-press one button is ON , press another button is OFF.

Specifications

Color	Black/White
Working Voltage	220V
Work Frequency	315 MHz / 433 MHz
Maximum Load	1500 W
Working Way	Jog , self-lock and inter-lock(Adjustable by pad)
Circuit Board Size	60 x 30 x 17 mm
Case Size	66 x 36 x 21 mm
Package Contents	1 x Receiver(with cover)  2 x Transmitters(with battery)