This Wireless Remote Control Switch consists of a 86 type wall panel transmitter (2 buttons ) and two receivers. The transmitter can be stuck anywhere with the 3M sticker included.
- 86 type panel wall remote transmitter with 2 buttons.
- Transmitter an be stuck anywhere.
- Transmission distance up to 200m.
- Momentary, Toggle, Latched adjusted freely by soldering with different dot .
- A: Momentary: No connection is Momentary.
- B: Toggle: Connect "T& Mid Dot "is Toggle.
- C: Latched: Connect "L& Mid Dot" is Latched.
- Momentary: Press the Transmitter button, the receiver relay is ON, release button; the receiver relay is OFF
- Toggle: Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF
- Latched: Press transmitter button A, the receiver relay is ON, Press the transmitter button B, the relay is OFF.
- Keep pressing the learning button, the LED indicator flash fast then press the transmitter button, until the LED indicator stop to flash fast, it mean learning successfully.
- Keep pressing the Learning Button on the receiver until the LED indicator flash fast until it flash slow 2 times. it mean the code have cleared successfully.
|Working Voltage||AC220V (Input AC220V Output AC220V)|
|Max Current||10A (have better lower than 7A )|
|Working temperature||-10\'C – +60\'C|
|Output way||Momentary. Toggle .Latched Adjustable|
|Code type||Learning code Add Controller by the Learning Button on the receiver|
|Battery Type||12V 27A (not included)|
|Package Contents||1 x Transmitter, 2 x Receiver|